Burlingame ADU Regulations & Zoning
When do Burlingame ADU regulations apply?
Planning an Accessory Dwelling Unit (ADU) starts with knowing what's possible on your property. Here's a quick snapshot of the key build guidelines and permitting details to help you move forward with clarity.
You can build an ADU up to 1,200 square feet with 4-foot setbacks from the side and rear property lines. Burlingame allows detached ADUs up to 16-18 feet in height depending on transit proximity. Your ADU must maintain a minimum 6-foot separation from other structures on the lot.
Permitting typically takes 2 to 3 months. The city's established neighborhoods have strong design character that may influence ADU aesthetics.
What Are the Rules for ADUs in
Burlingame
?
Number of ADUs Allowed
On single-family residential lots in Burlingame, you can build one ADU (attached or detached) and one Junior ADU (JADU). There is no minimum lot size requirement for ADU eligibility. Your property must be zoned for residential use with an existing or proposed primary dwelling.
Multifamily properties in Burlingame can build up to two detached ADUs with 4-foot setbacks. You can also convert non-livable spaces (such as storage areas, garages, or basements) into ADUs—up to 25% of the existing unit count.
Yes, Burlingame allows Junior ADUs up to 500 square feet. A JADU must be located entirely within the existing footprint of the primary residence or attached garage. JADUs require a separate entrance and an efficient kitchen, and may share a bathroom with the main home. Owner-occupancy is required—you must live in either the primary dwelling or the JADU.
Burlingame does not have a separate guest quarters classification. Any secondary living space with kitchen facilities would be classified as an ADU and count toward your allowable units.
ADU Size Limits
Detached ADUs in Burlingame can be up to 1,200 square feet. ADUs up to 800 square feet with 4-foot setbacks and 16-foot height limits qualify for streamlined ministerial approval and cannot be denied due to lot coverage, FAR, or open space requirements.
Attached ADUs are limited to 1,200 square feet or 50% of the primary dwelling's floor area, depending on configuration. State law guarantees attached ADUs of at least 850 square feet for one-bedroom units or 1,000 square feet for two or more bedrooms.
Yes. Under California state law, ADUs up to 800 square feet with 4-foot setbacks and 16-foot height cannot be denied due to lot coverage, FAR, or open space requirements. This is particularly helpful in Burlingame where lots are often fully developed.
About MolaADU
This page offers a clear summary of what’s allowed—how many ADUs you can build, size limits, setbacks, and other key requirements. But we go beyond the basics. Our insights are grounded in real-world experience, not just recycled bullet points.
Whether you're planning a rental unit, a guest house, or a space for multigenerational living, we’re here to help you move forward with clarity and confidence.
Height & Setbacks
Detached ADUs are typically limited to 16 feet in height, with up to 18-20 feet allowed near transit. Attached ADUs can match the primary dwelling's height up to 25 feet. Conversion ADUs have no height limit since they use existing structures.
Limited two-story configurations may be possible within the 18-foot height limit near transit or in certain zones. Most detached ADUs in Burlingame are single-story to maintain neighborhood character. Consult with the city planning department for specific guidance.
Detached ADUs require minimum 4-foot setbacks from side and rear property lines, plus at least 6 feet from existing structures. Front setbacks follow the underlying zoning district requirements. Conversions of legally established structures are exempt from setback requirements.
Burlingame requires detached ADUs to be at least 6 feet from the primary residence and any other existing structures on the lot for fire safety and maintenance access.
Permitting & Timeline
Burlingame processes ADU permits within 60 days as required by state law. Overall, expect 2-3 months from complete application to permit issuance. The San Mateo County ADU Resource Center offers free consultations and troubleshooting support.
Permit costs in Burlingame typically range from $8,000 to $20,000 depending on project scope and valuation—somewhat higher than neighboring cities. No impact fees are charged for ADUs under 750 square feet.
Burlingame does not routinely require soils reports or building surveys for standard ADU projects. Properties in special zones or with unusual conditions may require additional documentation.
Parking Requirements
No parking is required for ADUs within half a mile of public transit—which covers most of Burlingame given Caltrain stations at Burlingame and Broadway plus SamTrans bus service. Where parking is required, it cannot exceed one space per ADU. Conversion ADUs and JADUs never require parking.
No. When converting a garage or carport to an ADU, replacement parking is not required under California state law. This makes garage conversions an attractive option in Burlingame's established neighborhoods.
If parking is required, it can be located in setback areas, existing driveways (tandem parking), or elsewhere on the property per city standards.
ADU Costs & Rental Income
The total cost to build an ADU in Burlingame typically ranges from $300,000 to $500,000 depending on size, design, and site conditions. Burlingame's higher construction standards and established neighborhood character may increase design and finishing costs. Conversion projects typically cost less, starting around $100,000-$200,000.
Burlingame commands premium rents due to its excellent schools, downtown amenities, and San Francisco commuter access. Based on current market data: Bedrooms Average Rent Studio $2,200 - $2,500 1 Bedroom $2,600 - $2,900 2 Bedroom $3,200 - $3,600 3 Bedroom $3,900 - $4,300 Actual rents vary by neighborhood and proximity to downtown Burlingame Avenue or Broadway.
Several factors impact your total ADU cost in Burlingame: lot conditions (most are relatively flat), whether you're building detached or converting existing space, the level of finishes expected in the market, and utility upgrade requirements. Burlingame's mature neighborhoods may require design sensitivity to complement existing homes.
